Fugro
Fugro is the world’s leading Geo-data specialist, collecting and analyzing comprehensive in……...
iso-BTC: A Bench-Top, Battery Performance Testing, Isothermal Calorimeter
The iso-BTC (Battery Testing Calorimeter) is an isothermal calorimeterdesigned for the characterization of thermal behavior and electrical performance of battery cells under normal and extended use conditions.It supports a range of adaptors which allows a wide range of cell formatsto be analyzed.
The iso-BTC supports the full integration of a charge-discharge unit, allowing for therepeated, automatedcycling of battery cells under a range of operating conditions, while concurrently recording both the battery’s electrical performance and the heat evolved. It can also conductaccelerated aging tests, allowing the effect of battery aging on cell performance to be investigated. Battery chemistry, electrode composition, and battery cell type can also be investigated within cell development using the iso-BTC.
Thermal mapping (multipoint temperature measurement) allows the user to identify regions of a batterythat generate greater thermal energy to be highlighted. Along with the thermal behavior characterization of the battery cell over a range of temperatures and (dis)charge rates, this information can be used to inform effective and targeted thermal management strategies within the battery module and pack.
Features and Options
Type of Test
Performance testing
Characterizing performance under normal and abnormal use.
Aging and lifetime performancetesting.
Battery behavior as a function of charge/discharging rate and temperature
Heat release profiles.
Battery efficiency profiles.
Battery charging/discharging capacity profiles.
Battery/Sample Size
Coin cells, small pouch cells, and cylindrical cells. Battery adaptor selection for testing on cylindrical cells available.
Maximum chamber volume 250 mm wide, 250 mm deep, 80 mm high
Test sample volume will include any necessary adaptor volume.
Temperature Control
-20 °C to 90 °C as standard
Optional: Temperatures starting from -40 °C
Intelligent Software Control and Analysis
labCONSOL software control enables regular data logging, multi-step recipes, parameter control, and feedback loops. The software adds a responsive intelligence to the iso-BTC system and still delivers an intuitive interface that needs only minimal training to run quickly.
Safety Features
Automated shutdown procedures if a safety condition is exceeded to ensure user safety
N2purge for when operating under sub-ambient conditions
Multipoint sample temperature measurement
Automatic hardware and software fail-safes are installed on every system
Performance testing
Characterizing performance under normal and abnormal use.
Aging and lifetime performancetesting.
Battery behavior as a function of charge/discharging rate and temperature
Heat release profiles.
Battery efficiency profiles.
Battery charging/discharging capacity profiles.
Battery/Sample Size
Coin cells, small pouch cells, and cylindrical cells. Battery adaptor selection for testing on cylindrical cells available.
Maximum chamber volume 250 mm wide, 250 mm deep, 80 mm high
Test sample volume will include any necessary adaptor volume.
Temperature Control
-20 °C to 90 °C as standard
Optional: Temperatures starting from -40 °C
Intelligent Software Control and Analysis
labCONSOL software control enables regular data logging, multi-step recipes, parameter control, and feedback loops. The software adds a responsive intelligence to the iso-BTC system and still delivers an intuitive interface that needs only minimal training to run quickly.
Safety Features
Automated shutdown procedures if a safety condition is exceeded to ensure user safety
N2purge for when operating under sub-ambient conditions
Multipoint sample temperature measurement
Automatic hardware and software fail-safes are installed on every system
Coin cells, small pouch cells, and cylindrical cells. Battery adaptor selection for testing on cylindrical cells available.
Maximum chamber volume 250 mm wide, 250 mm deep, 80 mm high
Test sample volume will include any necessary adaptor volume.
Temperature Control
-20 °C to 90 °C as standard
Optional: Temperatures starting from -40 °C
Intelligent Software Control and Analysis
labCONSOL software control enables regular data logging, multi-step recipes, parameter control, and feedback loops. The software adds a responsive intelligence to the iso-BTC system and still delivers an intuitive interface that needs only minimal training to run quickly.
Safety Features
Automated shutdown procedures if a safety condition is exceeded to ensure user safety
N2purge for when operating under sub-ambient conditions
Multipoint sample temperature measurement
Automatic hardware and software fail-safes are installed on every system
-20 °C to 90 °C as standard
Optional: Temperatures starting from -40 °C
Intelligent Software Control and Analysis
labCONSOL software control enables regular data logging, multi-step recipes, parameter control, and feedback loops. The software adds a responsive intelligence to the iso-BTC system and still delivers an intuitive interface that needs only minimal training to run quickly.
Safety Features
Automated shutdown procedures if a safety condition is exceeded to ensure user safety
N2purge for when operating under sub-ambient conditions
Multipoint sample temperature measurement
Automatic hardware and software fail-safes are installed on every system
labCONSOL software control enables regular data logging, multi-step recipes, parameter control, and feedback loops. The software adds a responsive intelligence to the iso-BTC system and still delivers an intuitive interface that needs only minimal training to run quickly.
Safety Features
Automated shutdown procedures if a safety condition is exceeded to ensure user safety
N2purge for when operating under sub-ambient conditions
Multipoint sample temperature measurement
Automatic hardware and software fail-safes are installed on every system
Automated shutdown procedures if a safety condition is exceeded to ensure user safety
N2purge for when operating under sub-ambient conditions
Multipoint sample temperature measurement
Automatic hardware and software fail-safes are installed on every system
[iso-BTC: A Bench-Top, Battery Performance Testing, Isothermal Calorimeter]相关推荐
Buhler Technologies LLC
Buhler Technologies LLC is the specialist for level- and temperature control, coolers, filtration……...
NuNano Scout 350 HAR AFM Probe
The Scout 350 HAR available from NuNano comes as a pack of 10 silicon AFM probes that operate in ……...
Bühler AG
Billions of people come into contact with Bühler technologies to cover their basic needs for……...
Capstone Industries
Capstone Industries is a global entity focused on creating shareholder value by commercializing s……...
Aircraft Spruce & Specialty Co.
The foundation for what is now Aircraft Spruce & Specialty Co. dates to the summer of 1956 wh……...
今日仪器
-
HiTECH Technologies, Inc.
HiTECH’s unique line of Industrial Level Control Instrumentation provide not only excellent performance and outstanding quality, they are among the lowest priced on the market. HiTECH Technol……
-
Labplant UK
Labplant has been trading successfully since the late 1960's. From its origins in scientific glassblowing, we have grown to become one of the UK's leading independent laboratory equipment……
-
AW-Lake Company
AW-Lake Company, a TASI Group company, is a leading North American design, manufacturing and service company of flow measurement technology for the fluid control needs of various industries, includ……
