S60M TO-18 Single-Channel Silicon-Based Thermopile

Dexter‘s S60M TO-18 is a single-channel silicon-based thermopile that delivers high output. It features a small active area with dimensions of 0.6mm x 0.6mm in a small TO-18 package.

The silicon-based thermopile provides a rapid 18ms time constant in Argon encapsulation gas and faster 9ms time constant in Neon gas. In addition, the thermopile offers a low temperature responsivity coefficient of -0.04%/°C.

Benefits

The key benefits of the S60M TO-18 thermopile include:

Small active area

Fast time constant

High output

Low temperature responsivity coefficient

Applications

The S60M TO-18 thermopile can be used in the following applications:

Gas analysis

Non-contact measurement

Technical Specifications

The technical specifications of the S60M TO-18 are summarized in the following table:

General Specifications: Flat spectral response from 100nm to > 100μm. Linear signal output from 10^-6 to 0.1W/cm². Maximum incident radiance 0.1W/cm², damage threshold ≥ .5W/cm²

Notes: (1) Parameter is not 100% tested. 90% of all units meet these specifications. (2) A is detector area in cm². (3) Test Conditions: 500K Blackbody source; Detector active surface 10cm from 0.6513cm Diameter Blackbody Aperture.

*Protected by U.S. Patent No. 5,059,543 and U.S. Patent No. 5,100,479

General Specifications

The general specifications of the S60M TO-18 are listed below:

Flat spectral response from 100nm to > 100µm

Linear signal output from 10^-6 to 0.1W/cm²

Maximum incident radiance is 0.1W/cm²

Damage threshold is ≥ 0.5W/cm²

Notes

Specifications apply at 23°C with KBr window and nitrogen encapsulating gas

Parameter is not 100% tested. 90% of all units meet these specifications.

A is detector area in cm².

Test conditions: 500K Blackbody source; detector active surface 10cm from 0.6513cm diameter blackbody aperture.