2-3 axis Gantry type Manipulator from Güdel AG
2-3 axis module is the majority combination to cover large working ranges in a horizontal plain. ……...
ST150 is a single-channel silicon-based thermopile from Dexter, delivering a low temperature coefficient of responsivity of -0.04%/°C. The low-cost detector has a high output voltage with a quick time constant of 38ms.
It is supplied in a TO-5 package. In addition, it exhibits a very short thermal shock response to changes in ambient temperature.
Benefits
The key benefits of the ST150 include:
High output
Low cost
Large active area of 1.5 x 1.5mm
Options
The options available include:
A range of optical filter options are available
ST60R Micro version provides an economical (20% tolerance) poly-silicon resistor to be employed as a PTC thermistor
Internal 30kΩ 5% NTC chip thermistor offers ambient package temperature measurement
Internal aperture accurately defines active area for applications with FOV and/or spot size requirements
Applications
The ST150 is suitable for the following applications:
Gas analysis
Fire detection
Non-contact temperature measurement
Technical Specifications
The technical specifications of the ST150 are summarized in the following table:
Parameter | Min | Typical | Max | Symbol | Units | Comments |
---|---|---|---|---|---|---|
Active Area size | 1.5 x 1.5 | AA | mm | Hot junction size, per element. | ||
Element Area | 2.25 | A | mm2 | |||
Number of Junctions | 120 | Per element. | ||||
Number of Channels | 1 | Per detector package. | ||||
Output Voltage | 180 | 230 | 280 | Vs | μV | DC, H=330μW/cm2 (3) |
Signal-to-Noise Ratio | 4,063 | 5,990 | 8,946 | SNR | √Hz | DC, SNR=Vs/Vn |
Responsivity | 24.2 | 31.0 | 37.7 | ℜ | V/W | DC, ℜ=Vs/HA (2) |
Resistance | 60 | 90 | 120 | R | kΩ | Detector element |
Temperature Coefficient of ℜ | -.04 | %/°C | Best linear fit, 0° to 85°C (1) | |||
Temperature Coefficient of R | .11 | %/°C | Best fit, 0° to 85°C (1) | |||
Noise Voltage | 31.3 | 38.4 | 44.3 | Vn | nV/√Hz | Vn 2=4kTR |
Noise Equivalent Power | .83 | 1.24 | 1.83 | NEP | nW/√Hz | DC, NEP= Vn HA/Vs (2) |
Detectivity | .82 | 1.2 | 1.8 | D* | 108cm√Hz/W | DC, D*=Vs/ Vn H√A (2) |
Time Constant | 38 | ℑ | ms | Chopped, -3dB point (1) | ||
Field of View | 42°/92° | FOV | Degrees | See Assembly Drawings for FOV Description. | ||
Package Type | TO-5, | Standard package hole size: Φ.150” | ||||
Operating Temperature | -50 | 100 | Ta | °C | Short durations to 125°C possible | |
ST150R Thermistor Option | 55 | 75 | 95 | RT | kΩ | PTC Poly-Silicon resistor on detector die. |
ST150R Thermistor Temperature Coefficient of R | .107 | .11 | .113 | %/°C | ΔR/(RΔT), Best fit, 0° to 85°C (1) |
General Specifications: Flat spectral response from 100nm to > 100µm. Linear signal output from 10-6 to 0.1W/cm2. Maximum incident radiance 0.1W/cm2, damage threshold ≥ .5W/cm2
Notes: (1) Parameter is not 100% tested. 90% of all units meet these specifications. (2) A is detector area in cm2. (3) Test Conditions: 500K Blackbody source; Detector active surface 10cm from 0.6513cm Diameter Blackbody Aperture.
General Specifications
The general specifications of the ST150 are listed below:
Flat spectral response from 100nm to > 100µm
Linear signal output from 10-6 to 0.1W/cm2
Maximum incident radiance is 0.1W/cm2
Damage threshold is ≥ 0.5W/cm2
Notes
Specifications apply at 23°C with KBr window and nitrogen encapsulating gas
Parameter is not 100% tested. 90% of all units meet these specifications.
A is detector area in cm2.
Test Conditions: 500K Blackbody source; Detector active surface 10cm from 0.6513cm Diameter Blackbody Aperture
2-3 axis module is the majority combination to cover large working ranges in a horizontal plain. ……...
ACEINNA is a leading developer of Inertial Measurement Unit (IMU) sensing technology. Our unique ……...
AUVs belong to the often generalised category of UUVs – Unmanned Underwater Vehicles. This ……...
Netcracker has the expertise, culture and resources to help service providers transform their bus……...
LG Motion are the motion control technology specialists based in the UK delivering quality design……...
Evident supplies advanced solutions that help make the world safer and healthier. Committed to de……...
AW-Lake Company, a TASI Group company, is a leading North American design, manufacturing and service company of flow measurement technology for the fluid control needs of various industries, includ……
Mark-10 Corporation is a manufacturer of force and torque measuring instruments. Since our founding in 1979, our products have proven themselves in numerous applications at companies in the automot……
Flamefast started manufacturing Bunsen Burners for British Gas in 1973 when the UK changed from using town gas to natural gas and from there very quickly became the main innovators for training eq……