Thermo Scientific™ 5014iQ Beta Attenuation Monitor

上海仪舶实验室自动化 25-01-23 13:16:20

Thermo Scientific™ 5014iQ Beta Attenuation Monitor

The Thermo Scientific™ 5014iQ Beta Attenuation Monitor is designed to track levels of TSP, PM-2.5, PM-10, and PM-1 in the surrounding air. Its automatically advancing filter tape captures PM samples in a clean area, minimizing the need for attended operation.

To help reduce particle loss, user-defined parameters such as mass accumulation limits, flow rates, and continuous pattern advances are used to control the filter tape advancement.

The device monitors the sample conditions, removes moisture effects, adjusts the control system to heat only when necessary, and ensures that volatile aerosols are preserved for accurate measurement.

Product Overview

Specifications. Source:Thermo Fisher Scientific – Environmental and Process Monitoring Instruments

. .
Flow Rate 1 m3/h (16.67 L/min) measured across an internal subsonic orifice, user selectable 14 to 20 lpm
Gases Measured Carbon-14 (C-14), < 3.7 MBq (<100 μCi)
Temperature (English) Operating The temperature of sampled air may vary -30 to 50 °C. 5014iQ Monitor must be weather protected within range 4 to 40 °C, an optional complete outdoor enclosure provides complete weather protection
Accuracy ±5% using SI-traceable mass foil set (for mass measurement)
Certifications/Compliance U.S. EPA PM-2.5 equivalent monitor (EQPM-1609-183)
CommunicationProtocols MODBUS, TCP/IP, Gesytec (Bayern-Hessen), streaming data and NTP (Network Time Protocol) protocols. Simultaneous connections from different locations over Ethernet
Concentration Measurement Range 60 to 3,600 seconds and 24-hour
Data Averaging Every 1 second
Depth (English) 21.16 in.
Depth (Metric) 53.8 cm
Description 5014iQ Beta Attenuation Monitor
ElectricalRequirements Designed to meet CE: EN61326: 1997 + A1: 1998 + A2: 2001 + A3: 2003, EN61010-1 UL: 61010-1: 2004; CSA: C22.2 No. 61010-1: 2004; FCC: Part 15 Subpart B, Class B, UKCA
Height (English) 12.2 in.
Height (Metric) 31 cm
Measurement Range 0 to 10,000 μg/m3
Outputs
  • Standard ports 3 full-speed USB ports (one in front, two in rear) 1 gigabit ethernet port

  • Analog I/O (optional) 4 isolated voltage inputs 0–10 V 6 isolated analog voltages outputs, with 4 selectable ranges 6 isolated analog current outputs, with 2 selectable ranges

  • Digital I/O (optional) 16 digital inputs (TTL) 8 solenoid driver outputs,10 digital reed relay contact outputs

  • Serial ports (optional) 1 RS-232/485 port, 1 RS-485 external accessory port

  • Precision ±2.0 μg/m3, <80 μg/m3, 4–5 μg/m3 > 80 μg/m3 (24-hour average)
    Resolution 0.1 μg/m3
    Sampling Flowand Control
  • Sample flow precision: ±2% of measured value

  • Sample flow accuracy: <5% of measured value

  • Wattage
  • 100–240 VAC, 50–60 Hz recommended, 805 watts (115 V)

  • 880 watts maximum (220–240 V (instrument, heater & pump)

  • Weight (English) < 55.1 lbs.
    Weight (Metric) < 25 kg
    Width (English) 16.73 in.
    Width (Metric) 42.5 cm
    Unit Size Each

    Ongoing evaluation

    (EQPM-0609-183) equivalent monitor

    US EPA approved PM-10 (EQPM-1102-150) and PM-2.5

    High resolution, accuracy, and low detection limit

    ePort communication software and an improved user interface

    Improved connectivity over Ethernet

    Prolonged absence of supervision

    Remote access to data

    5014iQ Beta Attenuation Monitor.

    5014iQ Beta Attenuation Monitor.Image Credit: Thermo Fisher Scientific – Environmental and Process Monitoring Instruments

    5014iQ Beta Attenuation Monitor.

    5014iQ Beta Attenuation Monitor. Image Credit: Thermo Fisher Scientific – Environmental and Process Monitoring Instruments

    [Thermo Scientific™ 5014iQ Beta Attenuation Monitor]相关推荐
    Cambria Corporation

    Cambria Corporation

    Cambria Corporation designs, develops, and manufactures sensors for the environmental and automat……...

    Laird Technologies

    Laird Technologies

    Laird Technologies is the world’s leading designer and manufacturer of electromagnetic inte……...

    Bell Flow Systems Ltd

    Bell Flow Systems Ltd

    Bell Flow Systems was established in 1997 with the emphasis being firmly placed on the provision ……...

    CCR Medical, Inc

    CCR Medical, Inc

    CCR Medical specializes in the sale and manufacturing of Anesthesia and Respiratory Care products……...

    emza Visual Sense

    emza Visual Sense

    Smart, power efficient and low cost sensors are fundamental for IoT. Intelligence at the edge is ……...

    ACME Engineering Prod. Inc.

    ACME Engineering Prod. Inc.

    Acme remains a family run business that values its relationship with its clients. We recognize th……...

    今日仪器
    1. Bladon Micro Turbine

      Bladon Micro Turbine

      Bladon is a pioneer in the design, development and manufacture of Micro Turbine Gensets (MTGs) - using high-speed, ultra reliable and clean-burning microturbines together with patented air-bearing ……

      进口品牌 2025-07-04

    2. Origin Energy

      Origin Energy

      We're the leading Australian integrated energy company supplying electricity to 4.2 million customers and developing and producing natural gas - a cleaner form of energy for customers in Austr……

      进口品牌 2025-07-04

    3. Robert E. White Instrument Services

      Robert E. White Instrument Services

      Since 1918, when Wilfrid O. White formed the Kelvin & Wilfrid O. White Company in Boston, the White family has specialized in manufacturing and servicing finer nautical and weather instruments.……

      进口品牌 2025-07-04

    返回顶部小火箭