DGC-06: Digital Multi-Gas Controller System

The DGC-06:Digital Multi-Gas Controller System is designed to monitor and alert for toxic and combustible gases, vapors, and refrigerants across various gas measurements.

This controller system monitors and controls up to 128 gas types, 96 digital sensors, and 32 analog sensor options. It includes four freely adjustable alarm thresholds per connected sensor, meeting key safety code requirements such as EN50545-1 for CO monitoring, EN 378, and VBG 20 for NH₃ monitoring.

Note: The DGC-06 operates exclusively with the Fixed Multi-Gas Detector Series or Combustible Fixed Gas Detectors.

Features

Modular, user-friendly design suited for large facilities

128 gas sensor capacities

Four adjustable alarm thresholds per sensor

Five menu languages and adjustable settings

Configurable relays for various alarms

Alarm activation by rising or falling gas concentrations

PCE06 Software connector at the controller module

Flexible configuration with programmable parameters and set points

Warning buzzer/LED alarm with fault and operation options

Broad BMS compatibility

SIL2 Level Compliance

Specifications

Measurement Range: Dependent upon gas sensors selected

Housing Type C/E: Plastic Housing with View Cover

Gas Type: Dependent upon gas sensors selected

Installation: Wall Mounted

Ingress Protection: IP65

Knockouts for Cable Entry: Standard 6× M20/25

Storage Temp Range: 32 °F to 104 °F (0 °C to +40 °C)

Temperature Range: 23 °F to 104 °F (-5 °C to +40 °C)

Power Supply: 90/230 V AC, 50/60 Hz; 24 VDC ± 20 %

Humidity Range: 15-95 % RH non-condensing

Tension for external analog transmitter: 24 VDC ±20 %, max130 mA - per sensor

Power Consumption: Min. 30 W, 0.15 A, max. ca. 160 W, 0.7 A, depending on the type

Analog Input (4 to max. 32): 4–20 mA, overload and short-circuit proof, input resistance 130 µ

Analog output (max 16) configurable for each input:

4–20 mA = measuring range

Proportional, overload, and short-circuit proof, charge ≤ 500 µ

20–21.2 mA = over range

3.0–<4 mA = under range

2.0 mA = fault

Relay (max. 32): 250 VAC, 5 A; 30 V DC, 2 A, potential-free, change-over (SPDT)

Fault relay (1): 250 VAC, 5 A; 30 VDC, 2 A, potential-free, normally open contact (SPST)

Transceiver: RS485 / 19200 Baud

Dimensions: W × H × D - 11.7 × 10.2 × 5.5 in. | (298 × 260 × 140 mm)

Weight: Min. 4.4 Ib. (2.7 kg), max. 28.7 Ibs. (13 kg) depending on type

Weight: 1.32 lbs. (0.6 kg)

Menu Language (selectable): German, English, French, or Italian

Regulations

EMC Directive 2014/30/EU

ANSI/UL 61010-1

Low Voltage Directive 2014/35/EU

EN 61010-1:2010

EN 50271

CAN/CSA-C22.2 No. 61010-1

EN 50545-1

Warranty

1 year

Accessories

Options

MSC-2 | Multi-Gas Fixed Gas Detector

SC2-E1130-B-P-00 | NO₂ Digital Sensor for MSC2

SC2-E1110-A-P-00 | CO Digital Sensor for MSC2

SC2-E1195-A2-P-00 | O₂ Digital Sensor for MSC2

SC2-E1194-A-P-00 | H₂ Digital Sensor for MSC2

SC2-I464-B-P-00 | CO₂ Digital Sensor for MSC2