Indoor CO2 Grow Controller and Sensors

When using the proper amount of CO₂ each time, the CO2 Controller for Grow Rooms is made to optimize plant yields and assist growers in saving money. This gadget works perfectly in hydroponic farms, grow rooms, indoor greenhouses, mushroom farms, and other settings where higher CO₂ levels optimize plant growth.

Features

Automatic shut-off during dark times reduces CO₂ emissions.

Built-in temperature, humidity, and light sensors

Dual mode for greenhouse or mushroom applications

Controls up to two zones (suitable for small or big facilities)

Configurable user interface for controlling CO₂ tank and regulator

Adjust CO₂ setpoints for high and low levels

Top 4 Benefits of Using a CO2 Grow ControllerPlay

Video Credit: CO2Meter

Specification

Measurement Range: 0-3000 ppm CO₂

CO₂ Sensing Method: Non-dispersive Infrared (NDIR)

Target Gas Ranges: 0-2,000 ppm and 0-5,000 ppm

Measurements: Requires 1 liter per minute of constant flow per channel

Resolution: 1 ppm @ 0-1,000 ppm; 10 ppm above 1000 pm

Dimensions: 4.96×6.70×2.65 inches

Accuracy: ±70 ppm or ±5% CO₂

Sensor Response Time: < 2 minutes

Operating Temperature: –20 °C to 60 °C

Sensor Cables:CAT5e

Relays: 2 relays, either (Normally Open) NO or (Normally Closed) NC

Electrical

Power: Adapter 110/220 VAC

Power Consumption: 1 W max @ 115 VAC 60 Hz | 2 W max @ 230 VAC 50 Hz

Power Supply: <5 A @ 250 VAC, SPST

Included

(1) Indoor CO2 Controller

(2) Remote CO2 Sensors

(2) Relay Cables

(2) CAT5e Cables – 25’ ft.

(1) Wall Plug Safety Strap

(1) Mounting Bracket

(6) Screws

(1)110/220 VAC Power Supply

(3) International Power Adapters

Accessories

Solenoid Safety Shut-Off Valve SV-1029

Through the relay connection, the 3/8-inch solenoid valve is intended to turn the CO₂ tank regulator valve on and off. There is a power supply included.